Manual TW is module with patented current splitter topology for Tunable white control. It is intended to be used in any Tunable white luminaire that fits its operating range (input voltage and output current).

The module requires external LED driver for its biasing and LED powering.

Functional description

After powering up Manual TW electronic reloads last used setting of output current ratio. The new level is saved to memory after 10 seconds of push button inactivity. Push button 1 (PB 1) serves for increasing and Push button 2 (PB 2) for decreasing of output current ratio. There are two modes of current ratio transients – smooth mode and discrete mode.

DISCRETE MODE is activated by default. When short pressing one of the push buttons (holding pressed shorter than 1 second) the current ratio level is changed in discrete steps. One press activates change of one step.

SMOOTH MODE is activated when one of the push buttons is hold pressed longer than 1 second. After this period current ratio starts to change (increase or decrease) smoothly with approximately 2 % per second.


[list_circle][li]Manual TW Module 01 [/li][li]Manual TW Module 02[/li][/list_circle]


[one_half_last][h3]TECHNICAL PARAMETERS[/h3]

[h4]Connection[/h4][list_circle][li]Mains cable Wires AWG 24–12 (0.5–2.5 mm²)[/li][/list_circle]

[h4]Power[/h4][list_circle][li]Input Volgage (Vin terminal) : Module 01: 25V DC – 100V DC, Module 02: 25V DC – 56V DC[/li][li]Output Voltage (LED W, LED C terminal): 25VDC – 100VDC[/li][li]Module consumption < 15mW[/li][li]Output Current 0,1 – 2A[/li][/list_circle]

[h4]Mechanical data[/h4][list_circle][li]Housing: open case[/li][li]Dimension (l x w x h): 42 mm x 34 mm x 15 mm[/li][li]Weight: 10 g[/li][li]IP rating: IP 00 [/li][/list_circle]


[list_circle][li]iLumTech Manual TW 01 Datasheet (EN) [/li][li]iLumTech Manual TW 02 Datasheet (EN)[/li][/list_circle]